30 Ton Per Day Full Continuous Waste Rubber Tyre Pyrolysis Oil Plant
waste tire pyrolysis plant is decomposed into oil vapor by high temperature pyrolysis technology, and the oil vapor enters the cooling system through the oil gas separator, wherein the oil flows to the oil tank, and the pyrolysis gas passes through water seal to the gas recovery system to become the main furnace fuel. Realize continuous production.
fully continuous horizontal type pyrolysis system applies automatic feeding and discharging process, the raw
material is pyrolysied during the moving inside the reactor,which is of high automation,big capacity,and highly safety.
Appliacations of Tyre pyrolysis plant output products:
| Output Products | |
| Fuel Oil | * Can be directly sold to boiler factory, cement factory,glass factory etc.
* Can be refined to diesel by distillation machine.
* Used for heating. |
| Carbon black | * Can be directly sold to cement or brick factory.
* Pellet it used for heating. |
| Steel wire | * Directly sold to steel and scrap dealers.
* Treated by tire cutter before pyrolysis it, to get a cleaner and higher value steel wire. |
| Waste gas | * used for the heating and the smoke will be treated eco-friendly. |
Specification
| | | Fully continuous waste tyre/plastic/rubber prolysis plant |
| | | | | | |
| | | | | | |
| | | Waste tires,waste rubber,waste plastic,waste acrylic,oily sludge |
| | 24 hour handling capacity | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
Performance Feature
•Internal screw rotatory pyrolysis. No coking.
•Hot melt processing in advance,process generated HCL specially,more environmental protection.
•Adopt multilevel cooling design,to get more fuel oil.
•Hot air heat,cooperated with low temperature pyrolysis catalyst, extend working life of plant.
•Enclosed production all the way,no leakage and no dust loss,environmental protection.
•Exhaust gas multistage processed,gas discharge reach European Standard level.
Technological Process
•Waste tyre and medical waste sent into fuel preheater by conveyor to melt. Process generated HCL specially.
•Melted fuel continuously sent into reactor,and finish pyrolysis under low pressured catalyst.
•After generated gas during pyrolysis separates in gas-liquid separator, liquify in condenser and get fuel oil. After fixed bed second catalyst and dewaxing,can get the fuel oil with high quality.
•Carbon residue after pyrolysis output continuously by cooling conveyor,and made to be carbon rod as fuel.
•Flammable gas goes into exhaust gas treatment tank to desulfur,then extracted by vacuum pump and enter into water sealed tank,sent to hot air stove to burn.
Applications
It is applied to extract fuel oil from waste tires, rubbers, plastics, soles, life garbage, cable skin and so on .
seperating crude carbon black, steel wires. the sync gas produced can also be recycled to use as fuel to heat reactor, considerable cost of tire plastic plant.
|
|
30 Ton Per Day Full Continuous Waste Rubber Tyre Pyrolysis Oil Plant Images
|
